Paint Heaters

  • Binks Fluid Heater

    Binks Fluid Heater
    Binks High Pressure Stainless Steel Fluid Heaters are fully CE approved to provide users with the perfect solution for heated spray applications with operating temperatures from 60°F to 250°F. Heater includes a thermostat and preset heat limiter to protect the heating element.
    • Low maintenance - with simple operator friendly controls
    • Stainless Steel - suitable for most spray materials
    • Maximum pressure - 5000 psi
    • Temperature range - 60°F to 250°F

  • Graco Viscon HP Heaters

    Graco Viscon HP Heaters
    Graco's Viscon HP fluid heaters maintain optimal temperatures to provide consistent control of fluid viscosity. Their stainless steel design resists corrosion, and is compatible with most materials, including high solids coatings, epoxies, urethanes or waterbornes. With a temperature operating range of 84-219°F, Viscon HP heaters are excellent for any coating, sealant, adhesive or lubricant you can pump. Available in hazardous and non-hazardous models.
    • Pressure rating of 7250 psi
    • Temperature accuracy within ±3°F of set point
    • Excellent for high solids coatings, adhesives or resins
    • Increased heating capacity and temperature control
    • 7/16 in (11 mm) diameter fluid passages.
    • Available voltages: 120, 200, 240, 380, and 480 VAC

  • Graco Viscon Heaters

    Graco Viscon Heaters
    Original Graco Viscon aluminum paint heater features removable end plates with straight-thru passages for easy cleaning. Cast-aluminum body with integral helix heating element.
    • Heating Element Wattage: 2100 watts
    • Fluid Passage Area: 254 sq. in.
    • Max. temperature rise 100°F @ .25 gpm
    • 1/2" (14 mm) diameter fluid passages
    • Maximum Working Pressure: 3000 psi
    • Temperature Operating Range: 80-190°F
    • Inlet and outlet: 1⁄2 npt(f)
    • Wetted Parts: aluminum
    • Available voltages: 120 or 240 VAC

  • Kremlin HeatStripper Paint Heater

    Kremlin HeatStripper Paint Heater
    The Kremlin HeatStripper Paint Heater, with its proprietary HeatStripper™ technology, maximizes heat transfer efficiency and delivers extreme uptime. This heater will reduce the viscosity of paints without using solvents, guaranteeing an outstanding finish quality, whatever the ambient temperature may be.
    • Modular design - easy to maintain
    • Stainless Steel - suitable for most spray materials
    • Maximum pressure - 3,630 psi
    • Temperature range - 60°F to 195°F

  • Kremlin One-Pass Paint Heater

    Kremlin One-Pass Paint Heater
    The Kremlin One-pass™ heater is an economical and reliable solution to provide consistent control of fluid viscosity without adding solvents. Heating of the product is done in one single passage in the One-pass™ heater thanks to the optimized thermal exchange efficiency. This innovative design allows the One-pass heater to be installed directly between the pump and the gun without recirculation.
    • Low Voltage – only 14 amps
    • Smaller Fluid Passages – easy to flush & clean
    • Wall Scrubbing Mixers for efficient heat transfer
    • Stainless Steel Wetted Parts – great compatibility
    • Lightweight – easy to mount on cart or wall
    • Low Cost – easily justified for even small users
    • Small Size – easy to mount multiple units
    • Thermometer included
    • Use without the circulation typical of other heated systems
    • Total System cost is reduced